Window Glass: Adjustments

DOOR GLASS ADJUSTMENT







1. Adjust the clearance between the upper edge of the door glass and the ventilator glass weatherstrip.
- If vehicle has a convertible top, adjust the retainer. (See RETAINER ADJUSTMENT.)

2. Adjust the convertible top. (See Top Lock.)
3. Adjust the detachable hardtop. (See Top Lock.)
4. Raise the door glass fully and adjust it so that there is no clearance with the retainer weatherstrip.
5. Remove the retainer weatherstrip.
6. Adjust the door glass vertically.
7. Adjust the door glass forward/backward.
8. Adjust the door glass inward/outward.
9. Verify the door glass is in correct position when it is fully raised.
10. Install the weatherstrip.
11. Verify the door glass raises and lowers smoothly with the door closed.

NOTE: The front retainer installation hole is named retainer installation hole No.1, and the bottom hole is named retainer installation hole No.8 (convertible top) or retainer installation hole No.6 (detachable hardtop).

Vertical Adjustment







1. Measure the upper edge of the door glass and the retainer.
- If not as specified, loosen the glass stopper installation bolts, move the glass stopper up or down and reposition the door glass.

2. Tighten the bolts.

Forward/Backward Adjustment







1. Measure the rear edge of the door glass and the retainer.
- If not as specified, loosen the upper side of the window regulator installation nuts and that of the rear glass guide installation nuts, move the window regulator and the rear glass guide forward or backward and reposition the door glass.

2. Tighten the nuts.

Inward/Outward Adjustment







1. Measure the upper and rear edge of the door glass and the retainer.
- If not as specified, loosen the lower side of the window regulator installation nuts and that of the rear glass guide installation nuts, move the window regulator and the rear glass guide inward or outward and reposition the door glass.

2. Tighten the nuts.