Front Seat
FRONT SEAT REMOVAL/INSTALLATIONWARNING: Handling the front seat (side air bag) improperly can accidentally deploy the side air bag, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front seat.
1. Turn the ignition switch to LOCK position.
2. Disconnect the negative battery cable and wait for more than 1 minute.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
FRONT SEAT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Seat Back Cover Disassembly Note
1. Pull the edges of the seat back cover to disengage the clips from the seat back frame.
2. Pull up the seat back cover upward to disengage the clips from the seat back cover.
Pole Guide Disassembly Note
1. Squeeze the catches and push the pole guide upward.
Seat Back Frame Disassembly Note
1. Remove the seat back trim installation clips from the seat back frame.
2. Remove the seat back frame installation bolts.
Seat Back Trim Disassembly Note
1. Remove the seat back trim installation clips from the seat back frame
Seat Back Hardboard Disassembly Note
1. Bend the top of the seat back frame brackets up using a plier.
Switch Bezel Disassembly Note
1. Insert a tape-wrapped screwdriver as shown in the figure and pull up to remove the clips.
Seat Cushion Trim Disassembly Note
1. Remove the hooks from the seat cushion hardboard.
2. Unzip the zipper.
3. Remove the seat cushion trim installation clip from the side cover.
4. Remove the seat cushion trim installation clips from the seat cushion frame.
5. Pull the seat cushion trim upward to remove it.