Fog/Driving Lamp: Service and Repair

FRONT FOG LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Turn over the mud guard.
3. Remove in the order as indicated below.




1. Bolt
2. Connector
3. Front fog light
4. Screw
5. Cover
6. Front fog light bulb

4. Install in the reverse order of removal.
5. Adjust the front fog light.

Front Fog Light Bulb Removal Note

1. Remove the clip, then the front fog light bulb.

CAUTION: A halogen bulb generates extremely high heat when it is used. If the surface of the bulb is soiled, excessive heat will build up and the light's life will be shortened. When replacing the bulb, hold the metal flange, not the glass.