Tail Lamp: Service and Repair

REAR COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the trunk side trim.
3. Remove in the order as indicated below.




1. Connector
2. Screw
3. Rear combination light
4. Socket
5. Brake light/taillight bulb
6. Rear turn light bulb

4. Install in the reverse order of removal.

INBOARD COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the trunk lid trim.
3. Remove in the order as indicated below.




1. Connector
2. Nut
3. Inboard combination light
4. Gasket

4. Install in the reverse order of removal.