Removal/Installation

CONSOLE REMOVAL/INSTALLATION

1. For MTX vehicle, remove the shift lever knob.




2. Remove in the order indicated below.
1. Boot panel (See Boot Panel Removal Note.)
2. Console cover (See Console Cover Removal Note.)
3. Screw
4. Console

3. Install in the reverse order of removal.

Boot Panel Removal Note




1. Pull the boot panel upward, then disengage clips A and B from the console.

Console Cover Removal Note




1. Disengage clip A using a tape-wrapped flathead screwdriver.
2. Pull the console cover upward, then disengage hook B from the console.