Drive Belts, Mounts, Brackets and Accessories: Adjustments

DRIVE BELT ADJUSTMENT [FS]





1. Loosen mounting bolt A and B.





2. Adjust the belt deflection or tension by turning the adjusting bolt C.





Caution:
If the belt is replaced with a new one or the belt has been on a running engine for less than 5 minutes, adjust deflection or tension to "New" specification.
If the belt has been on a running engine for more than 5 minutes, adjust deflection or tension to "Used" specification.





Deflection





Tension








3. Tighten mounting bolt A and B.
4. Inspect the belt deflection or tension.
If not as specified, repeat from Step 1.