Camshaft Gear/Sprocket: Service and Repair

Camshaft Pulley Removal Note

1. Temporarily install the No.3 engine mount.
2. Remove the SST (engine support).
3. Hold the camshaft using a wrench on the cast hexagon as shown.

Alignment Marks:

Camshaft Pulley Installation Note

1. Install the camshaft pulleys with the "I" mark (intake side) or "E" mark (exhaust side) as shown in image.






2. Hold the camshaft using a wrench on the cast hexagon as shown.
Torque Specification: 37-44 ft-lb.