Instrument Cluster Removal and Installation/Disassembly and Assembly

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Pull down the adjusting lever of the tilt steering wheel and push the steering wheel down.
3. Remove the meter hood.




4. Remove in the order indicated below.
1. Screw
2. Connector
3. Instrument cluster (See Instrument Cluster Removal Note)

5. Install in the reverse order of removal.

Instrument Cluster Removal Note




1. When removing the instrument cluster, in order to prevent damage to the lens, cover the steering shaft with a cloth.

INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY

CAUTION: If the instrument cluster is dropped or the print plate is damaged, the system will not operate properly and it may become the cause of trouble or malfunctions.




1. Disassemble in the order indicated below.
1. Screw
2. Bracket
3. Lens
4. Bulb
5. Screw
6. Cover
7. Screw
8. Instrument cluster
9. Case

2. Assemble in the reverse order of disassembly.