Tail Lamp: Service and Repair

REAR COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the trunk side trim.




3. Remove in the order indicated below.
1. Connector
2. Nut
3. Rear combination light
4. Socket (See Socket Installation Note)
5. Brake light/taillight bulb
6. Rear turn light bulb
7. Back-up light bulb
8. Rear side marker light bulb (4SD)
9. Taillight bulb (4SD)

4. Install in the reverse order of removal.

Socket Installation Note




1. Hook the harness as shown in the figure.