Radio, Stereo, and Compact Disc: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE

NOTE: When asking the supplier (service center) for repair or replacement, verify which supplier the module belongs to and enter in the Audio Repair Order Form.

Identification With Printed Numbers/Label
1. Remove the audio unit.










2. Verify the supplier name written on the label attached on each module.

Identification With On-board Diagnostic Test Mode
1. Start the on-board diagnostic test mode.
2. Verify the part number and supplier code displayed in the LCD.

NOTE: When no DTCs are in the memory, part numbers and supplier codes will not be displayed.