Connectors
Data link connector
Insert the probe into the service hole when connecting a jumper wire to the data link connector.
Caution: Inserting a jumper wire probe into the data link connector terminal may damage the terminal.
Disconnecting connectors
When disconnecting two connectors, grasp the connectors, not the wires.
Connectors can be disconnected by pressing or pulling the lock lever as shown.
Locking connector
When locking connectors, listen for a click indicating they are securely locked.
Inspection
When a tester is used for checking continuity or measuring voltage, insert the tester probe from the wiring harness side.
Check the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.
Caution: To prevent damage to the terminal, wrap a thin wire around the lead before inserting into terminal.