Diagnostic Assist Function

DIAGNOSTIC ASSIST FUNCTION

Structural View

LCD Inspection
1. With audio on, first press the POWER button, then simultaneously press the SEEK button (upper) for approximately 1 second.




2. Inspect the LCD according to the given table:
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Button Inspection
1. With audio on, first press the POWER button, then simultaneously press the TAPE/MD button for approximately 1 second.




2. Inspect the button according to the given table:
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Speaker Inspection
1. With audio on, first press the POWER button, then simultaneously press the AUTO-M button for approximately 1 second.




2. Inspect the speaker according to the given table:
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Radio Reception Condition
1. With audio on and at radio mode, first press the POWER button, then simultaneously press the preset button "2" for approximately 1 second.




2. The diagnostic assist function displays the radio reception condition in 10 levels (0-9) to assist in determining the condition of the antenna, antenna feeders, and base unit (tuner).
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Audio Amplifier (External) Inspection
1. With audio on, first press the POWER button, then simultaneously press the SCAN button for approximately 1 second.




2. Inspect the audio amplifier (external) according to the given table:
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.