Rear Washer Hose [5HB, WGN]

REAR WASHER HOSE REMOVAL/INSTALLATION [5HB, WGN]

1. Disconnect the negative battery cable.
2. Remove the washer tank.
3. Partially peel oft the right side mud guard.




4. Remove rear washer hose No.1 from the clips.
5. Remove rear washer hose No.1 and joint pipe A.
6. Remove the A-pillar trim.




7. Remove rear washer hose No.2 from clip A.
8. Remove clips B from the body.
9. Remove rear washer hose No.2 and joint pipes B.
10. Remove the C-pillar trim.
11. Remove the D-pillar trim. (WON)
12. Remove the litigate upper trim.




13. Remove rear washer hose No.3 from clip C.
14. Remove clips D from the body. (5HB)
15. Remove rear washer hose No.3 and joint pipe C.
16. Remove the headliner.




17. Remove the tape from rear washer hose No.4.
18. Install in the reverse order of removal.