Rear Wiper Motor [5HB, WGN]

REAR WIPER MOTOR INSPECTION [5HB, WGN]

1. Disconnect the negative battery cable
2. Remove the litigate lower trim.
3. Disconnect the rear wiper motor connector
4. Connect battery positive voltage to the rear wiper motor terminal A, and ground the rear wiper motor terminal B to a bare metal part of the vehicle.




5. Verify that the rear wiper motor operates.
6. Disconnect the ground to the terminal B while the rear wiper is operating.




7. Verify that the rear wiper stops in the park position.
- If not as specified, replace the rear wiper motor.