Intake-Air System Removal/Installation
INTAKE-AIR SYSTEM REMOVAL/INSTALLATIONWARNING: Hot engines and the intake-air system can cause severe burns. Turn off the engine and wait until it and the intake-air system are cool before removing the intake-air system.
1. Disconnect the negative battery cable.
2. Drain the engine coolant from the radiator. (See ENGINE COOLANT REPLACEMENT.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Refill the radiator engine coolant. (See ENGINE COOLANT REPLACEMENT.)
Intake Manifold Gasket Installation Note
1. Install the intake manifold gasket with the convex side of the gasket facing the intake manifold side.
Dynamic Chamber Gasket Installation Note
1. Install the dynamic chamber gasket with the convex side of the gasket facing the intake manifold side.
Dynamic Chamber Bracket Installation Note
1. Tighten the bolts firmly, then tighten the dynamic chamber side bolt before tightening the fuel distributor side bolt.