Initial Inspection and Diagnostic Overview

INSTRUMENT CLUSTER INSPECTION

Speedometer

1. Remove the speedometer. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)







2. Measure the resistance between the speedometer terminals using an ohmmeter.
- If not as specified, replace the speedometer. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)

Tachometer

1. Remove the tachometer. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)







2. Measure the resistance between the tachometer terminals using an ohmmeter.
- If not as specified, replace the tachometer. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)

Fuel Gauge

1. Remove the fuel gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)







2. Measure the resistance between the fuel gauge terminals using an ohmmeter.
- If not as specified, replace the fuel gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)

Water Temperature Gauge

1. Remove the water temperature gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ ASSEMBLY.)







2. Measure the resistance between the water temperature gauge terminals using an ohmmeter.
- If not as specified, replace the water temperature gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ ASSEMBLY.)

Oil Pressure Gauge

1. Remove the oil pressure gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)







2. Measure the resistance between the oil pressure gauge terminals using an ohmmeter.
- If not as specified, replace the oil pressure gauge. (See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)