Fog/Driving Lamp: Service and Repair

FRONT FOG LIGHT REMOVAL/INSTALLATION

LH

1. Disconnect the negative battery cable.
2. Remove the front side marker lights.
3. Remove the front bumper.
4. Disconnect the connector.




5. Remove the screws, then remove the front fog light.
6. Install in the reverse order of removal.
7. Adjust the front fog light aiming.

RH

1. Disconnect the negative battery cable.
2. Remove the front side marker lights.
3. Remove the front bumper.
4. Disconnect the connector.




5. Remove screws A and pull back the front fog light cover in the direction of the arrow.
6. Remove screw B, then remove the front fog light cover.
7. Remove screws C, then remove the front fog light.
8. Install in the reverse order of removal.
9. Adjust the front fog light aiming.