Rear Trailing Link (Lower) Removal/Installation

REAR TRAILING LINK (LOWER) REMOVAL/INSTALLATION





1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Inspect the rear wheel alignment.

Caliper Component Removal Note
1. Hang the caliper component and move aside.

Rear Trailing Link (Lower) Removal Note





1. Support the rear knuckle using a jack.

Caution:
^ Be sure that the rear axle component is firmly supported by the jack. If not securely supported, the rear axle component could fall, resulting in serious injury or death, and damage to the vehicle.

2. Remove the rear trailing link (lower) outer bolt.
3. Remove the rear trailing link (lower) inner bolt.