Engine - Engine Cover Grommets Loose/Fall Off
01-001/04RX8
ENGINE COVER GROMMETS MISSING
APPLICABLE MODEL(S)/VINS
RX8 (Below VIN: JM1FE17**40124611 built before 11-12-2003)
DESCRIPTION
Engine cover grommets may become loose and fall off. A revised engine cover grommet (larger diameter) is available to correct this concern. Vehicles within the VIN range with this condition should be repaired using the procedure below.
REPAIR PROCEDURE
1. Remove the engine cover
2. Replace missing grommets with a revised grommet.
3. Adjust the position of the engine cover and reinstall making sure all grommets are seated properly.
4. Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term information.