Body Control Systems: Service and Repair

PASSENGER JUNCTION BOX (PJB) REMOVAL/INSTALLATION

1. When replacing the PJB, perform the following:
- PJB configuration
2. Disconnect the negative battery cable.







3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.

Connector A Removal Note




1. Push the release tab in the direction of the arrow.
2. Rotate the lever in the direction of the arrow and remove connector A.

Connector B Removal Note




1. Rotate the lever in the direction of the arrow and remove connector B.

PJB Removal Note




1. Turn the screws counterclockwise to remove the PJB.

NOTE: Screws cannot be remoyed trom the PJB.




2. Remove the PJB as shown in the figure.

Connector B ln8taIlation Note




1. Install the connector B as shown in the figure.

Connector A Installation Note




1. After connecting the connector, rotate the lever in the direction of the arrow to install connector A.