Front Door Window Glass: Service and Repair

FRONT DOOR GLASS REMOVAL/INSTALLATION




1. Lower or raise the front door glass so that the distance from the top of the front door glass at the molding is 60 mm {2.24 in}.
2. Disconnect the negative battery cable. (Vehicles with power window system)
3. Remove the inner garnish.
4. Remove the regulator handle. (Vehicles with manual window system)
5. Remove the front door trim.
6. Remove the front door speaker.

NOTE: For installing the front door glass, the front door speaker must be removed to align the glass edge with the glass run channel by hand, through the speaker installation hole.

7. Remove the hole cover.




8. Remove the screws.
9. Lift the front door glass up and remove it while tilting it in the direction of the arrow.
10. Install in the reverse order of removal.