Front Door: Service and Repair

FRONT DOOR UNIT REMOVAL/INSTALLATION

1. Remove the following parts:
1. Inner garnish.
2. Regulator handle (Vehicles with manual window system).
3. Front door trim.
4. Front beltline molding.
5. Front door glass.
6. Front door speaker.
7. Rod protector (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)
2. Remove the rod from the front outer handle and front door key cylinder.
3. Disconnect the power outer mirror connector.
4. Disconnect the front door wiring harness connector.




5. Remove the tab, then remove the front door wiring harness bracket.




6. Remove screws A, B, and the fastener.
7. Remove the front door unit.
8. Install in the reverse order of removal.