Head Impact Pad

HEAD IMPACT PAD REMOVAL/INSTALLATION

1. Remove the following parts:
1. Console (4 door)
2. A-pillar trim
3. Front scuff plate
4. Rear scuff plate
5. B-pillar lower trim
6. Upper anchor of the front seat belt
7. B-pillar upper trim
8. Rear seat
9. Tire house trim
10. Trunk side upper trim (5 door)
11. C-pillar trim
12. Map light
13. Sun visor
14. Assist handle
15. Headliner




2. Remove the fastener. (Rear)




3. Pull the head impact pad outward and detach the clips A and the locator pins B.
4. Remove the head impact pad.
5. Install in the reverse order of removal.