B-Pillar Lower Trim

B-PILLAR LOWER TRIM REMOVAL/INSTALLATION

WARNING: Handling the side air bag sensor improperly can accidentally deploy the side air bag module, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before working around the B-pillar areas.

NOTE: The side air bag sensor is located in the B-pillar.

1. Remove the front scuff plate.
2. Remove the rear scuff plate.




3. Pull the area marked A, then remove one side of the B-pillar lower trim.
4. Pull the B-pillar lower trim outward and remove it.
5. Install in the reverse order of removal.