Spoiler: Service and Repair

REAR SPOILER REMOVAL/INSTALLATION

4 Door the nuts.






1. Remove
2. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the rear spoiler from the trunk lid.

WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

3. Pull the rear spoiler upward, then disengage clips A and tabs B from the trunk lid.
4. Remove the rear spoiler.

5. Install in the reverse order of removal.






1. Attach double-sided adhesive tape to the rear spoiler as shown in the figure.

5 Door


1. Remove the liftgate upper trim.






2. Remove the bolts and nut.
3. Pull the rear spoiler upward, then disengage clips A from the liftgate.
4. Remove the rear spoiler.
5. Install in the reverse order of removal.