Removal and Installation
CLIMATE CONTROL UNIT REMOVAL1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Ashtray panel (See CONSOLE REMOVAL/INSTALLATION.)
2. Detach the hood release lever from the lower panel. (See HOOD LATCH REMOVAL/INSTALLATION.)
3. Front scuff plate
4. Front side trim
5. Lower panel
6. Decoration panel
7. Glove compartment
8. PASSENGER JUNCTION BOX (PJB) and PJB bracket.
3. Detach the PJB wiring harness clamp from the dashboard.
4. Remove the center panel module.
5. Remove the air mix wire and airflow mode wire from the A/C unit.
6. Release the left and right tabs and remove in the order indicated in the table.
CLIMATE CONTROL UNIT INSTALLATION
1. Pass each wire through the following routes and connect to A/C unit.
2. Connect the climate control unit connectors.
3. Install the climate control unit.
4. Adjust the climate control unit wires.
5. Install the following parts:
1. Center panel module
2. Ashtray panel (See CONSOLE REMOVAL/INSTALLATION.)
3. PASSENGER JUNCTION BOX (PJB) and PJB bracket.
4. PJB wiring harness clamp to the dashboard
5. Glove compartment
6. Decoration panel
7. Lower panel
8. Front side trim
9. Front scuff plate
10. Hood release lever to the lower panel (See HOOD LATCH REMOVAL/ INSTALLATION.)
6. Connect the negative battery cable.