4 Door

REAR SEAT BELT REMOVAL/INSTALLATION

CAUTION: The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

4 door
1. Remove the following parts:
1. Rear seat.
2. Rear scuff plate.
3. Tire house trim.
4. C-pillar trim.
5. Rear package trim.







2. Remove in the order indicated in the table.
3. Instal in the reverse order of removal.