Component Tests and General Diagnostics
SEAT WEIGHT SENSOR INSPECTIONCAUTION:
- If any of the following work is performed, perform the seat weight sensor inspection using the WDS or equivalent.
- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
- Or, the vehicle is involved in a collision
- If any of the following work is performed, perform the seat weight sensor calibration using the WDS or equivalent.
- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat
1. Have two 20 kg {44 lb} weights ready to use.
2. Connect the WDS or equivalent to the DLC-2 (16-pin).
3. Select "Body" from the menu.
4. Select "Restraints".
5. Select "Seat Weight Sensor Rezero Procedure".
6. Perform inspection following the procedures on the WDS or equivalent screen.