3RD/4TH Clutch Hub Component Inspection
3rd/4th Clutch Hub Component Inspection1. Inspect the clutch hub sleeve and hub operation.
^ If there is malfunction, replace parts as necessary.
2. Inspect the gear teeth for damage, wear, and cracks.
^ If there is malfunction, replace parts as necessary.
3. Inspect the synchronizer keys for damage, wear, and cracks.
^ If there is malfunction, replace parts as necessary.
4. Measure the clearance between the hub sleeve and shift forks.
^ If the clearance exceeds the maximum, replace the hub sleeve and shift fork as a set.
Standard:
0.10 - 0.40 mm (0.004 - 0.015 in)
Maximum:
0.90 mm (0.035 in)