A-Pillar Trim

A-PILLAR TRIM REMOVAL/INSTALLATION

1. Partially peel back the seaming welt.




2. Pull the A-pillar trim, then disengage clips A.
3. Pull the A-pillar trim, then disengage clip B (1).
4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar trim (2).
5. Disengage the tabs from the dashboard, then remove the A-pillar trim.




6. Pull clip B out, then rotate 45 °.
7. Remove clip B from the grommet by pulling it outward.
8. Install in the reverse order of removal.