Selector Lever Inspection

SELECTOR LEVER INSPECTION
1. Turn the ignition switch to the ON position. (engine OFF)





2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when shifted from P position to M range.





5. Verify that the positions of the selector lever and the indicator are aligned.
^ If there is any malfunction, adjust the TR switch.

6. Verify that the vehicle operates in each selected range.

SELECTOR LEVER COMPONENT INSPECTION
1. Disconnect the negative battery cable.
2. Remove the center console.
3. Remove the dashboard completely.
4. Disconnect the selector lever component connector.








5. Inspect for continuity at the selector lever component.
^ If there is any malfunction, adjust the selector cable.