Pressure Plate: Testing and Inspection

CLUTCH COVER INSPECTION





1. Measure the wear of the diaphragm spring fingers.
^ If not as specified, replace the clutch cover.
Depth 0.6 mm (0.024 inch) maximum





2. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.
^ If not as specified, replace the clutch cover.
Clearance 0.3 mm (0.012 inch) maximum
3. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.





4. Rotate the flywheel and check for misaligned diaphragm spring fingers.
^ If not as specified, replace the clutch cover.
Misalignment 0.6 mm (0.024 inch) maximum