Front Seat
FRONT SEAT REMOVAL/INSTALLATIONWARNING: Handling the front seat (with a side air bag) improperly can accidentally deploy the side air bag, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front seat (with a side air bag).
CAUTION:
- When the passenger's seat is removed, perform the seat weight sensor inspection using the WDS or equivalent after installing the passenger's seat.
- When the passenger's seat is replaced with a new one, perform the seat weight sensor calibration using the WDS or equivalent.
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for more than 1 minute.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
FRONT SEAT DISASSEMBLY/ASSEMBLY
WARNING: Handling the front seat (with a side air bag) improperly can accidentally deploy the side air bag, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front seat (with a side air bag).
CAUTION:
- If any of the following work Is performed, perform the seat weight sensor calibration using the WDS or equivalent.
- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat
- If any of the following work is performed, perform the seat weight sensor inspection using the WDS or equivalent.
- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
1. Disconnect the negative battery cable and wait for more than 1 minute.
2. Remove the side air bag module.
3. Disassemble in the order indicated in the table.
4. Assemble in the reverse order of disassembly.
Lumbar support lever disassembly note
1. Remove the pin from the lumbar support lever installation part with rag.
Side cover disassembly note
1. Remove the screws.
2. Disengage clips A.
3. Lift the side cover up in the direction of the arrow, then unhook it from slide adjuster.