Camshaft (RH) Assembly Note

Camshaft (RH) Assembly Note





1. Turn the crankshaft clockwise to position the crankshaft keyway in the 3 o'clock position.





2. Install the camshafts (RH).
1) Position the exhaust camshaft so that the mark is at 12 o'clock direction.
2) Position the intake camshaft so that the mark is at 3 o'clock direction.

Caution
^ Do not install thrust caps 1R and 5R at this time, or damage to the thrust caps may occur.

Note
^ Tighten the camshafts caps at specified torque after assembling the timing chain.
^ The camshaft bearing caps are numbered to make sure they are assembled in their original positions.

3. Hand tighten the camshaft caps (RH) in their original positions.