Joint Shaft Assembly [AJ]

JOINT SHAFT ASSEMBLY [AJ]





1. Assemble in the order indicated in the table.

Bearing Assembly Note





1. Install the new bearing using the SST and a press.

Note:
^ Press the outer race of the bearing.

Dust Seal (Differential Side) Assembly Note





1. Apply grease to the new dust seal lip.
2. Install the new differential side dust seal using a press, steel plate and the SST.

Caution: Do not damage the rubber part of the dust cover.

Dust Seal (Drive Shaft Side) Assembly Note





1. Apply grease to the new dust seal lip.
2. Install the new drive shaft side dust seal using the SSTs and a press.

Joint Shaft Assembly Note





1. Install the joint shaft using a press and the SST.

Note:
^ Support the inner race of the bearing.