Removal and Replacement

DOOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. To remove the door stay (checker), remove the following parts:
1. Door trim
2. Door speaker

3. To remove the door hinges, remove the following parts:
1. Front bumper
2. Front combination lights
3. Side step molding
4. Mad guard
5. Front fender panel

4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Adjust the door.






Connector Removal Note






1. Pull down the lever in the direction indicated by the arrow and disconnect the connector.