Electronic Brake Control Module: Service and Repair

ABS HU/CM REMOVAL/INSTALLATION





1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.

Connector Removal Note





1. Pull the lock lever to disconnect the connector.

Brake Pipe Removal Note





1. Mark the brake pipe connecting positions before removal for reference during installation.

ABS HU/CM Removal/Installation Note
1. When removing/installing the ABS HU/CM from/to the vehicle, attach a strip of protective tape on the ABS HU/CM connector to prevent brake fluid from entering.

Brake Pipe Installation Note





1. When installing the brake pipe, align the marks made before removal with the ABS HU/CM as shown in the figure.

Connector Installation Note





1. Verify that the lock lever is completely pushed in.