Gap Adjustment
Gap Adjustment1. Remove the following parts:
1. Front side turn lights
2. Front bumper
3. Front combination lights
4. Front fender panel
2. Loosen the hood hinge installation bolts and adjust the hood.
3. Tighten the bolts.
4. Verity that the gap between the hood and the body is within the specification.
Standard clearance
a: 0.2-3.8 mm {0.007-0.14 in}
b: -1.0-3.0 mm {-0.039-0.11 in} (4 door)
b: -1.5-2.5 mm {-0.059-0.098 in} (5 door)
c: 4.5-2.5 mm {-0.019-0.098 in} (4 door)
c: -1.0-2.0 mm {-0.039-0.078 in} (5 door)
d: 2.5-4.5 mm {0.10-0.17 in}