C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

4 Door

1. Remove the rear seat.
2. Remove the rear scuff plate.
3. Remove the tire house trim.






4. Partially peel back the seaming welt.
5. Detach clips A and locator pin B, using a fastener remover.
6. Detach tabs C, D and E from the body and remove the C-pillar trim.
7. Install in the reverse order of removal.

5 Door

1. Remove the following parts:
1. Rear seat
2. Rear scuff plate
3. Tire house trim
4. Trunk side upper trim

2. Partially peel back the seaming welt.






3. Remove the fasteners.
4. Detach clips A, B and locator pins C, using a fastener remover.
5. Remove the C-pillar trim.
6. Install in the reverse order of removal.