Front

FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts.
1. Inner garnish
2. Regulator handle (Vehicles with manual window system)
3. Front door trim
4. Front door glass
5. Front door speaker
6. Inner handle
7. Front door unit




3. Pull the stopper of the front door lock actuator connector in the direction of the arrow (1).
4. Disconnect the front door lock actuator connector while pushing at point A.
5. Remove the front door latch and lock actuator from the front door unit.
6. Install in the reverse order of removal.