Removal and Replacement
REAR SPOILER REMOVAL/INSTALLATION4 DOOR
1. Remove the nuts.
2. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the rear spoiler from the trunk lid.
WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
3. Pull the rear spoiler upward, then disengage clips A and tabs B from the trunk lid.
4. Remove the rear spoiler.
5. Install in the reverse order of removal.
1. Attach double-sided adhesive tape to the rear spoiler as shown in the figure.
5 DOOR
1. Remove the liftgate upper trim.
2. Remove the bolts and nut.
3. Pull the rear spoiler upward, then disengage clips A from the lingate.
4. Remove the rear spoiler.
5. Install in the reverse order of removal.
Mazdaspeed3
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim.
3. Disconnect the connector.
4. Remove the bolts and nut.
5. Pull the rear spoiler upward, then disengage clips A from the liftgate.
6. Remove the rear spoiler.
7. Install in the reverse order of removal.