Wheel Unit ID Registration
WHEEL UNIT ID REGISTRATIONWhen Replacing Wheel Unit
Note: After the wheel unit replacement, registration of the wheel unit identification codes must be performed automatically according to the following procedure.
1. Turn the. ignition switch to the ON position, then turn off.
2. Leave the vehicle with the engine off for 15 min or more.
3. Drive the vehicle at a speed of 25 km/h (15.5 mph) or more for 10 min or more.
4. After driving for 10 min, verify that the TPMS warning light has neither flashed nor illuminated.