Steering Shaft: Service and Repair

STEERING SHAFT INSPECTION
1. Inspect the column bearing for excessive play and damage.





2. Verify that the measurement of the steering shaft indicated in the figure is as specified. If not within the specification replace the steering shaft component.

Steering shaft length 315 - 320 mm (12.41 - 12.59 in)





3. Inspect the tilt/telescope mechanism operation for the following.
(1) Tilt/telescope lever moves smoothly from the lock to the unlock position.
(2) Steering shaft is fixed firmly when the tilt/telescope lever is locked. If there is any malfunction, replace the steering shaft.