A-Pillar Trim Removal/Installation

A-PILLAR TRIM REMOVAL/INSTALLATION

1. Partially peel back the seaming welt.
2. Remove clips A using a fastener remover.
3. Pull the A-pillar trim outward and remove clip B from the grommet (1).






4. Slide the A-pillar trim upward and remove clip B from the A-pillar trim (2).






5. Pull clip B out and rotate it 45°.
6. Pull clip B and remove it from the grommet.
7. Install clip B to the A-pillar trim.
8. Install in the reverse order of removal.