Climate Control Unit Inspection [Manual Air Conditioner]

CLIMATE CONTROL UNIT INSPECTION [MANUAL AIR CONDITIONER]

1. Connect the climate control unit connector.
2. Turn the ignition switch to the ON position.
3. Connect the negative (-) lead of the tester to body ground.

Part 1:

Part 2:

Part 3:

4. By inserting the positive (+) lead of the tester into each climate control unit terminal, measure the voltage according to the terminal voltage table.
- If there is any malfunction, inspect the parts under "Inspection item(s)".
- If the parts under "Inspection item(s)" are found to be normal, replace the climate control unit.