Maximum Steering Angle Adjustment
Maximum Steering Angle Adjustment1. Loosen the tie-rod end locknuts.
2. Remove the steering gear boot clamp.
3. Turn the tie rods to equalize the length L.
Maximum left/right difference 3 mm (0.12 inch)
4. Turn the tie rods equally to provide the correct maximum steering angle.
5. Tighten the tie-rod end locknuts.
Tightening torque 68.6 - 98.0 Nm (7.00 - 9.99 kgf-m, 50.6 - 72.2 ft. lbs.)
6. Verify that the boot is not twisted, and install the boot clamp.
7. Adjust the toe-in after adjusting the steering angle.