After Repair Procedure [AW6A-EL]

AFTER REPAIR PROCEDURE [AW6A-EL]





Caution:
^ After repairing a malfunction, perform this procedure to verify that the malfunction has been corrected.
^ When this procedure is carried out, be sure to drive the vehicle at lawful speed and pay attention to the other vehicles.

1. Connect the WDS or equivalent to the DLC-2.
2. Turn the ignition switch to the ON position (engine off).
3. Select the clear code function and clear the DTC.
4. Perform the following trouble code inspections to ensure that the DTC has been resolved:
^ For P0601, P0603, P0604, P0780, P0817, P0882,P0883,P0942,P0961,P0962, P0963,P0973,P0974,P0976,P0977, P0978,P0979,P0980,P0981,P0982, P0983, P0984, P10985, P0986, P0997, P0998,P0999,Pl7OO,P2762,P2763,P2764
i. Start the engine.
ii. Warm up the engine and ATX
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1 GR to 6 GR. iv. Go to Step 5.
^ For P0706, P0707, P0708
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Depress the brake pedal, and shift the selector lever from P to D for 5 s or more.
iv. Gradually slow down and stop the vehicle.
v. Turn the ignition switch to the LOCK position.
vi. Go to Step 5.
^ For P0711
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 15 minutes or more.
iv. Gradually slow down and stop the vehicle.
v. Turn the ignition switch to the LOCK position.
vi. Go to Step 5
^ For P0712, P0713
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 150 s or more.
iv. Gradually slow down and stop the vehicle.
v. Turn the ignition switch to the LOCK position.
vi. Go to Step 5.
^ For P0717, P0722
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle, two separate times, in D range at 20 km/h (12 mph) or more for 150 s or more.
iv. Gradually slow down and stop the vehicle.
v. Turn the ignition switch to the LOCK position.
vi. Go to Step 5.
^ For P0731, P0732
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 10 km/h (6 mph) or more for 2 s or more.
iv. Go to Step 5.
^ For P0733
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 20 km/h (12 mph) or more for 2 s or more.
iv. Go to Step 5.
^ For P0729, P0734, P0735
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 40 km/h (25 mph) or more for 2 s or more.
iv. Go to Step 5.
^ For P0736
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in R range.
iv. Go to Step 5.
^ For P0819
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in M range, and shift the selector lever (operate up and down switches) between 1 GR to 6 GR for 10 s or more.
iv. Go to Step 5.
^ For P2757
i. Start the engine.
ii. Warm up the engine and ATX.
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1 GR to 6 GR and TCC is operated.
iv. Go to Step 5.
^ For P2758
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1 GR to 6 GR and TCC is no operated.
iv. Go to Step 5.
5. Gradually slow down and stop the vehicle.
6. Make sure that no DTCs occur.