Initial Inspection and Diagnostic Overview

BASIC POWER WINDOW SYSTEM INSPECTION

Step 1-Step 4:

Manual power window system inspection

Step 1-Step 3:

Automatic Mode Function Inspection

NOTE: Perform the given inspection for the Dower window main switch and the power window subswitches for each window.

Step 1-Step 2:

Automatic Door Glass Return Function Inspection

NOTE:
- Perform the inspection for the power window main switch and the power window subswitches for each window.
- With the switch held at auto-up, the door glass does not automatically reverse even when a foreign object is encountered.

Step 1-Step 5:

IG OFF Timer Function Inspection

Step 1:

Two-step Down Function Inspection
- The distance the door glass opens can be changed using the two-step down function (approx. 20-1 00 mm (0.79-3.93 in)).
- The two-step down function can be made inoperative. (The function is operative at the initial setting.)
- The two-step down function does not function during IG OFF timer.

NOTE: Perform the given inspection for the power window main switch and the power window subswitches for each window.