Immobilizer System (Keyless Entry System)

DTC TABLE [IMMOBILIZER SYSTEM]

DTC 11-21:

Not Illuminated:

NOTE:
- Perform if the security light stays on:
- If engine stalls, go to symptom troubleshooting No. 11 "ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK, HESITATION/STUMBLE, SURGES" in Computers and Control Systems.
- If engine won't start, go to symptom troubleshooting No.6 "CRANKS NORMALLY BUT WILL NOT START" in Computers and Control Systems.
- If engine condition is normal but light stays on, inspect for continuity between the following wiring harness and body ground: security light and PCM terminal 2W (L3) or 2 (AJ). Repair or replace the wiring harness.