Without Scan Tool

INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE






NOTE: In this mode, it is possible to check the items in the chart.

NOTE:
- Check code which are not listed may be indicated, but they cannot be inspected.
- The check codes are displayed in numerical order. (While performing the inspection, if you want to inspect a check code of which the number is smaller than the code number you are currently inspecting, terminate the check mode then repeat the inspection from the beginning.)
If a speed signal is input to the instrument cluster (the front wheels are rotated) the input/output check mode will be cancelled.
The check codes can be fast-forwarded by pushing and holding the odometer/tripmeter switch for 1 second or more.

Operating Order:

Operating Order